Panasonic KX-TS730AZ Conference Phone User Manual


 
Preparation
7
Connections
Note:
LUse only provided Panasonic AC adaptor PQLV206AL (9V/750 mA) for proper product
operation. In case of power outage, this product will not work.
LThe AC adaptor must remain connected at all times. (It is normal for the adaptor to feel
warm during use.)
LThe AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
LThe unit will not work during a power failure. We recommend connecting a standard
telephone to the same telephone line or to the same telephone jack using a telephone
double adaptor (for Australia) or a T-adaptor (for New Zealand).
LThe unit is not designed to be used with rotary (pulse dialling) services.
Interface box
Interface cable
To power outlet
(AC 220-240 V,
50/60Hz)
AC adaptor
Telephone line cord
To disconnect the interface
cable, pull out the cable
while pushing the tabs.
Fasten the AC adaptor
cord.
Bottom of the
interface box
Hooks
Fasten the
interface cable.
OR
Telephone line cord
For New Zealand
To single-line telephone jack
For Australia
To socket
TS730AZ.book 7 ページ 2005年11月9日 水曜日 午後4時34分