Useful Information
29
Display messages
One of the following messages will be displayed in the condition described below.
Troubleshooting
General use
Programmable settings
Display message Cause & solution
Phonebook full LThere is no space to store new items in the phonebook.
Erase unnecessary items (page 15).
No items stored LYour phonebook, redial list or caller list is empty.
Memory full LConversation recording memory is full. Erase
unnecessary items (page 28)
Problem Cause & solution
The unit does not work. LCheck the connections (page 7).
LUnplug the unit’s AC adaptor or Interface cable to reset
the unit. Reconnect the adaptor or interface cable and
try again.
I cannot hear a dial tone. LConfirm that the telephone line cord is connected
(page 7).
LDisconnect the unit from the telephone line and connect
a known working telephone. If the working telephone
operates properly, contact our service personnel to
have the unit repaired. If the working telephone does
not operate properly, contact your telephone company.
Problem Cause & solution
I cannot program items. LDo not pause for over 1 minute while programming.
While programming, the
unit starts to ring.
LA call is being received. Answer the call and start again
from the beginning after a call is finished.
TS730AZ.book 29 ページ 2005年11月9日 水曜日 午後4時34分