Filter
Top Products
Useful InformationAnswering System
Preparation
95
Troubleshooting
Telephone System
For assistance, please call: 1-800-211-PANA(7262)
You cannot program any
function items.
• Programming is not possible while the
handset or base unit is being used.
• Do not pause for over 60 seconds while
programming.
• Walk closer to the base unit.
• While another user is listening to messages or
the Answering System is handling a call, you
cannot program. Try again later.
While programming or
searching, the handset or base
unit starts to ring and the
program/search stops.
• A call is coming in. To answer the call, press
[
C], [s], or the called line soft key ( )
or ( ) on the handset, or press
[SP-PHONE] or the called line button on the
base unit. Start again from the beginning after
hanging up.
You cannot make an intercom/
outside call.
• If more than 1 other user is using the handset
and/or base unit, you may not be able to make
a call. Try again later.
• Your handset is in remote operation mode
(p. 74). Exit by pressing [OFF].
• The handset you called is too far from the
base unit.
You cannot redial. • If the last number dialed was more than 48
digits long, the number will not be redialed
correctly.
• The [REDIAL/PAUSE] button functions as
either redial or pause. It will redial the last
number dialed if pressed before dialing any
digits (p. 34, 38). If another number has been
dialed first, it will operate as a pause button
(p. 65).
You cannot make long
distance calls.
• Please make sure you have long distance
service.
Problem Cause & Remedy
LINE1
LINE2
TG6500.book Page 95 Friday, June 25, 2004 6:56 PM