Filter
Top Products
Programmable Settings
24
Ringer Volume
You can set the handset and base unit ringer volumes to high, medium, low, or off
for each line. The factory preset for both lines is HIGH.
If the handset or base unit ringer is turned off for both lines, the handset or base unit
will ring at the low level for intercom calls, and will not ring for outside calls.
Handset ringer volume
• If the handset ringer is turned off for a line, the handset displays “Ringer off”
and the line number while the handset is not in use. If there are new messages,
“Ringer off” will not be displayed.
•
You can also adjust each line’s ringer volume while the line is ringing. Press
[d]
or
[B]
while the handset is ringing.
1
Press
[MENU]
.
2 Scroll to “Ringer setting” by pressing
[d] or [B], then press the soft key ( ).
3 Press the soft key ( ) at “Ringer
volume”.
4 Press [d] (Line1) or [B] (Line2) to select
the line.
5 Select the desired volume by pressing [d] or
[B].
• The volume will change and ring.
• The number of steps indicates the volume level.
• To turn the ringer off, press [d] repeatedly until
“Off ?” is displayed.
To change the ringer tone, press the soft key
( ). Select the ringer tone by pressing
[d] or [B]. See “Handset ringer tone” on
page 26, step 5.
6 Press the soft key ( ).
• To select the other line, repeat from step 3.
7 Press [OFF].
Handset
SELECT
Ringer setting
SELECT
Ringer volume
Ringer volume
d
=Line1
B
=Line2
TONE
Ringer volume L1
Low High
d
B
BACK
TONE SAVE
Ex. High
Ringer volume L1
Off ?
Ex. Off
SAVE
TG6500.book Page 24 Friday, June 25, 2004 6:56 PM