Filter
Top Products
Programmable Settings
37
Other options
Dial lock
This feature prohibits making outside calls.
The default setting is OFF.
Important:
LWhen dial lock is turned on, only
phone numbers stored in the
phonebook as emergency numbers
(numbers stored with a # at the
beginning of the name) can be dialled
using the phonebook (page 21). We
recommend storing emergency
numbers in the phonebook before
using this feature.
LWhen dial lock is turned on, you cannot
store, edit, or erase items in the
phonebook.
To turn dial lock on
1 Press {MENU}.
2 Scroll to “Dial lock” by pressing {V}
or {^}, then press {>}.
3 Enter a 4-digit password.
LThis password is required when
turning dial lock off. We recommend
writing the password down.
4 Press {Save}.
5 Press {Yes}.
L“Dial lock on” will be displayed.
6 Press {OFF}.
Note:
LIf dial lock is turned on, the handset
displays “Dial lock”. While there are
missed calls, “Dial lock” is not
displayed when the handset is off the
base unit or charger.
To turn dial lock off
1 Press {MENU}.
2 Scroll to “Dial lock” by pressing {V}
or {^}, then press {>}.
3 Enter the same password that was
entered when dial lock was turned on.
4 Press {Save}.
5 Press {Yes}.
L“Dial lock off” will be displayed.
6 Press {OFF}.
Note:
LIf you forget the password, consult your
nearest Panasonic service centre.
Handset key tone
You can select whether or not key tones
are heard when keys are pressed.
Includes confirmation tones and error
tones. The default setting is ON.
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
3 Scroll to “Key tone” by pressing {V} or
{^}, then press {>}.
4 Press {V} or {^} repeatedly to select
“On” or “Off”.
5 Press {Save}, then press {OFF}.
Re-registering the handset
If “No link to base. Move closer
to base, try again.” is displayed
even when the handset is near the base
unit, you may need to re-register the
handset to the base unit.
Important:
LMake sure the base unit is not being
used.
TG5831_5832AL.book Page 37 Monday, March 14, 2005 4:28 PM