Filter
Top Products
Useful Information
80 For assistance, please visit http://www.panasonic.com/consumersupport
Answering system
The display exits the
caller list while searching.
L The handset automatically exits after 1 minute of
inactivity.
The 2nd caller’s
information is not
displayed during an
outside call. (The Call
Waiting Caller ID (CWID)
feature does not
function.)
L In order to use Caller ID, Call Waiting, or Call Waiting
Caller ID (CWID), you must first contact your telephone
company and subscribe to the desired service.
After subscribing, you may need to contact your
telephone company again to activate this specific
service, even if you already subscribed to both Caller ID
and Call Waiting with Caller ID services (CWID).
The handset display does
not indicate that you have
new messages or missed
calls, even though you
do.
L If the wallpaper feature is turned on, the wallpaper
pattern is displayed when you press {OFF} 2 times. To
display “New message” or the number of missed calls
again, press {MENU} then {OFF}.
Problem Cause & solution
I cannot listen to
messages from a remote
location.
L A touch tone phone is required for remote operation.
L Press the remote code correctly and press each key
firmly (page 65).
L The answering system is off. Turn it on (page 66).
E flashes and the
ANSWER ON indicator
flashes rapidly. No new
messages are recorded.
L Message memory is full. Erase unnecessary messages
(page 62).
The unit does not record
new messages.
L The answering system is turned off. Turn it on (page 61,
66).
L The recording time is set to “Greeting only”. Select
“1min”, “2min”, or “3min” (page 69).
L Message memory is full. Erase unnecessary messages
(page 62).
L If you subscribe to the Voice Mail service, messages
are recorded by the telephone company not your
telephone. Change the unit’s “Ring count” setting so
that the unit’s answering system can answer the call
before the Voice Mail service or consult your telephone
company (page 68).
I cannot operate the
answering system.
L Someone is operating the answering system.
L If someone is talking on a conference call, you cannot
operate the answering system. Try again later.
During message
playback, the unit rings
and cancels playback.
L A call is being received. Answer the call and start again
from the beginning after hanging up.
Problem Cause & solution
TG5571_5576.book Page 80 Friday, June 10, 2005 6:46 PM