Filter
Top Products
Programmable Settings
For assistance, please visit http://www.panasonic.com/consumersupport 57
5 Press {SAVE} or {GUARDAR}, then
press {OFF}.
Note:
L If you select a language you cannot
read, press {MENU} {#} {1} {1} {0}
{1} {SAVE} to change the display
language to English.
Flash time
The flash time depends on your telephone
exchange or host PBX.
You can select: “90ms” (milliseconds),
“100ms”, “110ms”, “250ms”, “300ms”,
“400ms”, “600ms”, or “700ms”.
1 Press {MENU} (center of joystick).
2 Scroll to N, then press {SELECT}.
3 Scroll to “Set tel line”, then press
{SELECT}.
4 Scroll to “Set flash time”, then
press {SELECT}.
5 Push the joystick up or down repeatedly
to select the desired setting.
6 Press {SAVE}, then press {OFF}.
Note:
L The setting should stay at 700 ms unless
pressing the soft key {FLASH} fails to
pick up the Call Waiting call.
L If the unit is connected via a PBX, certain
PBX functions (call transferring, etc.)
may not work correctly. Consult your
PBX supplier for the correct setting.
Line mode
The line mode is preset to “B” and
generally should not be adjusted. If
S on the handset is not displayed
and the IN USE indicator on the base unit
does not light properly when another
phone connected to the same line is in
use, the line mode selection is incorrect.
Set line mode to “A”.
1 Press {MENU} (center of joystick).
2 Scroll to N, then press {SELECT}.
3 Scroll to “Set tel line”, then press
{SELECT}.
4 Scroll to “Set line mode”, then press
{SELECT}.
5 Push the joystick up or down repeatedly
to select the desired setting.
6 Press {SAVE}, then press {OFF}.
Base unit settings
These features can be set by using the
handset.
Base unit ringer volume
You can also adjust the base unit ringer
volume from the base unit (page 26).
1 Press {MENU} (center of joystick).
2 Scroll to N, then press {SELECT}.
3 Scroll to “Set base unit”, then press
{SELECT}.
4 Scroll to “Ringer volume”, then press
{SELECT}.
5 Push the joystick up or down repeatedly
to select the desired volume.
L To turn the ringer off, push the joystick
down repeatedly until “Off ?” is
displayed.
6 Press {SAVE}, then press {OFF}.
TG5571_5576.book Page 57 Friday, June 10, 2005 6:46 PM