Filter
Top Products
Programmable Settings
For assistance, please visit http://www.panasonic.com/consumersupport 49
Ringer settings K
Handset ringer volume
4 levels (high/medium/low/off) are
available.
1 Press {MENU} (center of joystick).
2 Scroll to K, then press {SELECT}.
3 Scroll to “Ringer volume”, then press
{SELECT}.
4 Push the joystick up or down repeatedly
to select the desired volume.
L To turn the ringer off, push the joystick
down repeatedly until “Off ?” is
displayed.
5 Press {SAVE}.
Note:
L When the ringer volume is set to off, the
handset will not ring for outside calls.
The handset will ring at the low level for
intercom calls.
L When the ringer volume is set to off, the
handset will not announce caller names
(page 33).
Handset ringer tone
You can change the ringer tone heard
when an outside call is received. There are
3 tones, 4 melodies, and 2 songs.
Important:
L You can record songs for the handset
ringer tone from an audio device. See
“Recording songs from an audio device
for ringer tones” on page 50.
L Color display models (KX-TG5576 and
KX-TGA552 only):
You can download songs (in wave file
format) for the handset ringer tone from
a PC. For information on using this
feature, refer to the help section of the
GIGARANGE USB Utility software. If
you have not installed the GIGARANGE
USB Utility software, refer to the
included “Installation Guide for
GIGARANGE USB Utility” for details.
1 Press {MENU} (center of joystick).
2 Scroll to K, then press {SELECT}.
3 Scroll to “Ringer tone”, then press
{SELECT}.
4 To select a tone or melody, scroll to
“Tone & Melody”, then press
{SELECT}.
OR
To select a song, scroll to
“Customized ring”, then press
{SELECT}.
5 Push the joystick up or down repeatedly
to select the desired item.
L If the ringer volume has been turned
off, the handset will not ring.
6 Press {SAVE}, then press {OFF}.
Note:
L If you subscribe to a distinctive ring
service (such as IDENTA-RING), select
a tone (Tone 1 to 3). If you select a
TG5571_5576.book Page 49 Friday, June 10, 2005 6:46 PM