Filter
Top Products
Programmable Settings
For assistance, please visit http://www.panasonic.com/consumersupport 51
11 Press {SAVE}, then press {OFF}.
12 Disconnect the audio cable from the
handset.
Note:
L KX-TG5571, KX-TGA550, and KX-
TGA551 only:
The total recording time is 90 seconds.
L KX-TG5576 and KX-TGA552 only:
Recorded songs are stored in the same
memory storage space as downloaded
pictures. If no pictures are stored in the
memory, the total recording time is about
7 minutes. Therefore, depending on the
data size of the pictures you
downloaded, the total recording time will
change. To confirm the handset memory
for songs and pictures, see page 52.
Playing back a song
1 Press {MENU} (center of joystick).
2 Scroll to K, then press {SELECT}.
3 Scroll to “Customize ring”, then
press {SELECT}.
4 Scroll to “Playback”, then press
{SELECT}.
5 Push the joystick up or down repeatedly
to select the desired song.
6 Press {PLAY}.
L The song will be replayed for 1
minute.
7 Press {STOP}, then press {OFF}.
Erasing a song
While the song is selected or playing,
press {ERASE} or {CLEAR}, then press
{YES}.
Note:
L If the erased song was used for the
handset ringer (page 49), “Tone 1”
(default) will be used instead of that
song.
L If the erased song was assigned to
certain callers (Ringer ID, page 33), the
Ringer ID assignment will be canceled,
and the handset ringer tone (page 49)
will be used instead of that song.
Changing the name of a song
1 Press {MENU} (center of joystick).
2 Scroll to K, then press {SELECT}.
3 Scroll to “Customize ring”, then
press {SELECT}.
4 Scroll to “Rename”, then press
{SELECT}.
5 Push the joystick up or down repeatedly
to select the desired song.
6 Press {RENAME}.
7 Edit the name (max. 15 characters,
page 27).
8 Press {SAVE}, then press {OFF}.
Ring color
You can change the ringer indicator color
used when an outside call is received.
Select “Color1” (amber), “Color2”
(blue), “Color3” (green), or
“Multicolor”.
1 Press {MENU} (center of joystick).
2 Scroll to K, then press {SELECT}.
3 Scroll to “Ring color”, then press
{SELECT}.
4 Push the joystick up or down repeatedly
to select the desired ringer indicator
color.
5 Press {SAVE}, then press {OFF}.
TG5571_5576.book Page 51 Friday, June 10, 2005 6:46 PM