Filter
Top Products
Useful Information
60 For assistance, please call 1-800-211-PANA (7262).
Making/answering calls, Intercom
Problem Cause & solution
Static is heard, sound
cuts in and out.
Interference from other
electrical units.
LMove the handset and the base unit away from other
electrical appliances.
LMove closer to the base unit.
LRaise the base unit antennas.
LTurn on the clarity booster feature (page 20).
LIf your unit is connected to a telephone line with xDSL
service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your xDSL provider for details.
The handset does not
ring.
LThe ringer volume is turned off. Adjust it (page 37).
I cannot make a call. L The dialing mode may be set incorrectly. Set the dial
mode (page 40) to match the type of telephone service
you have (tone or pulse).
LIf the base unit (including answering system) or another
handset is in use, you may not be able to make a call.
Try again later.
LWhile listening to messages using the handset, you
cannot make a call. Exit by pressing {OFF}.
I cannot redial by
pressing {REDIAL}.
LIf the last number dialed was more than 48 digits long,
the number will not be redialed correctly.
LIf you press {REDIAL} after you have started dialing,
this button functions as the {PAUSE} button. To redial,
do not dial any numbers before pressing {REDIAL}.
I cannot have a
conversation using the
headset.
LMake sure that an optional headset is connected
properly (page 57).
LIf “SP-phone” is displayed on the handset, press {C}
to switch to the headset.
I cannot make long
distance calls.
LMake sure that you have long distance service.
I cannot page the
handset or base unit.
LThe called handset is too far from the base unit.
LThe called unit is in use. Try again later.