Filter
Top Products
Answering System Features
For assistance, please call 1-800-211-PANA (7262). 49
Calling back (Caller ID subscribers
only)
If Caller ID information was received for
the call, you can call the caller back while
listening to a message.
Press {Call} during playback.
Note:
LTo edit the number before calling back,
press {Edit} repeatedly to select the
desired format (page 28), then press
{Call}, {C}, or {s}.
Memory capacity
The total recording capacity (including
your greeting message and caller
messages) is about 15 minutes. A
maximum of 64 messages (including a
greeting message) can be recorded.
LIf message memory becomes full:
–“E” flashes on the base unit.
– the ANSWER ON indicator flashes
rapidly (if the answering system is
turned on).
– the unit announces “Memory full”
when operating the answering
system.
To record additional messages, erase
unnecessary messages.
LIf less than 3 minutes of recording time is
available, the unit will announce the
remaining recording time when
operating the answering system.
LMessages are retained even if a power
failure occurs. All messages are saved
until you erase them. (Flash memory
message backup)
LThe total recording capacity may be
reduced by the calling party’s
background noise.