Filter
Top Products
Preparation
16 For assistance, please call 1-800-211-PANA (7262).
Setting the date and time
Set the date and time so that the unit will
announce the day and time each message
was recorded by the answering system
(page 45) when you play back messages.
1 Press {MENU}.
2 Scroll to “Date and time” by pressing
{V} or {^}, then press {>} or {Select}.
3 Enter the current month, day, and year
by selecting 2 digits for each.
Example: June 15, 2005
Press {0}{6}{1}{5}{0}{5}.
4 Enter the current hour and minute (12-
hour clock format) by selecting 2 digits
for each.
Example: 9:30 PM
Press {0}{9}{3}{0}.
5 Select “AM” or “PM” by pressing {AM/
PM}.
6 Press {Save}.
LWhen the date and time are set, E
disappears from the base unit
display.
LIf the handset beeps 3 times, the date
and time were not set correctly. Enter
the correct digits.
7 Press {OFF}.
Note:
LIf you make a mistake when entering the
date and time, press {<}, {>}, {V}, or
{^} to move the cursor, then make the
correction.
LIf a power failure occurs, E will flash to
indicate the date and time must be set
again.
To confirm the date and time
Repeat steps 1 and 2. Press {OFF} when
finished.
Time adjustment (Caller ID subscribers
only)
When calls are received, Caller ID will
automatically adjust the date and time
(including daylight saving time).
LIf you have not set the date and time
manually, Caller ID will not adjust the
date and time.
LYou can turn this feature off (page 42).
K
Back
dB
Select
L
Date and time
Date:12.31.2005
Time:12:00 AM
K
AM/PM Save
L
Date:06.15.2005
Time:12:00 AM
K
AM/PM Save
L
Date:06.15.2005
Time:09:30 AM
K
AM/PM Save
L