Filter
Top Products
Useful Information
58 For assistance, please call 1-800-211-PANA (7262).
Error messages
If the unit detects a problem, one of the following messages will be displayed on the
handset.
*1 KX-TG5432 and KX-TG5433 only
Display message Cause & solution
Busy LThe called handset is in use.
*1
LThe handset you tried to copy phonebook items to is in
use.
*1
LThe handset you are calling is too far from the base
unit.
*1
Error!! LWhen you tried to register the handset, the handset and
the base unit could not link for some reason, such as
interference from electrical appliances. Move the
handset and the base unit away from the electrical
appliances and try again.
LAnother handset tried to send phonebook items to you
but there was an error. Have the other handset user re-
send the items to you (page 24).
*1
---Incomplete---
Phonebook full
LWhen the phonebook item(s) was(were) sent to another
handset, the handset’s phonebook memory was full
and copying stopped. Press {OFF} to exit. Erase items
from the other handset’s phonebook (page 23). When
phonebook memory is available, you can copy all
phonebook items (page 25) or individual items one by
one (page 24, 25).
*1
No link to base.
Move closer to
base, try again.
LThe handset has lost communication with the base unit.
Move closer to the base unit, and try again.
LConfirm that the base unit’s AC adaptor is plugged in.
LRaise the base unit antennas.
LThe handset’s registration may have been canceled.
Re-register the handset (page 41).
Phonebook full LThere is no space to store new items in the phonebook.
Erase unnecessary items (page 23).
No items stored LYour phonebook or redial list is empty.
Please lift up and
try again.
LA handset button was pressed while the handset was
on the base unit or charger. Lift the handset and press
the button again.
System is busy.
Please try again
later.
LThe handset has lost communication with the base unit.
Move closer to the base unit and try again.
LMore than one unit is in use. Try again later.
*1
LAnother user is listening to messages. Try again later.