Filter
Top Products
42
Intercom
Intercom calls can be made between a handset and the base unit, and between two
handsets (when the system has two or more handsets, p. 3). You can page all
handsets at once from the base unit, and announce the page to all handsets (Voice
Paging, p. 44).
Page the desired unit(s) by entering the extension number , shown in the top right of
each handset’s display. The base unit’s extension number is 0.
Making Intercom Calls
From
From
Using this feature, you can also locate a misplace d handset.
1 Press [HOLD/INTERCOM].
2 To page the base unit, press [0].
To pag e another hand set, press it s extension
number ([1] to [4]).
• The paged unit will ring for 1 minute.
• To stop paging, press [OFF].
3 When the paged party answers, start talking.
• You can switch to the speaker by pressing [s].
To switch back to the receiver, press [C].
4 To disconnect the intercom, press [OFF].
1 Press [LOCATOR/INTERCOM/TRANSFER].
• The LO CATOR/INTERCOM/TRANSFER and SP-PHONE indicators light.
2 To p age all handsets, press [0].
To pa ge a specified handset, press it s extension number [1] () to [4]
().
• The handset(s) will ring for 1 minute.
•
To stop paging, press
[SP-PHONE]
or
[LOCATOR/INTERCOM/TRANSFER]
.
3 When the paged party answers, talk into the MIC.
4 To disconnect the intercom, press [SP-PHONE] or [LOCATOR/
INTERCOM/TRANSFER].
• The indicator lights go out.
Handset
Press extension#
to call
1-4=Handset
0=Base
Calling Base
Ex. Calling Base unit
Calling HS[2]
Ex. Calling Handset 2
Intercom
00-00-05
D01
Ex. Intercom be t w ee n
Handset 1 & Base uni
t
Base Unit
TG5230.fm Page 42 Wednesday, February 4, 2004 9:51 AM