Filter
Top Products
Special Features
58
Using the PAUSE Key
(For PBX Line/Long Distance Calls)
We recommend you press the soft key (Pause) or (P) if a
pause is required for dial with a PBX or to make a long
distance call.
Ex. Line access number [9] (PBX)
[9] N Soft key (Pause) or (
P) N
• Pressing the soft key (Pause) or (P) once creates a 3.5
second pause. This prevents misdialing when you dial
after confirming the entered number (p. 30) or dial a stored number (p. 46, 48).
• Pressing the soft key (Pause) or (P) more than once increases the length of the
pause between numbers.
FLASH Button
Pressing [FLASH/CALL WAIT] allows you to use special features of your host PBX
such as transferring an extension call, or accessing optional telephone services
such as call waiting.
• Pressing [FLASH/CALL WAIT] cancels temporary Tone Dialing mode or the mute
(p. 57).
Selecting the flash time
The flash time required depends on your telephone exchange or host PBX.
You can select the following flash times: “700, 600, 400, 300, 250, 110, 100 or
90 ms (milliseconds)”. The factory preset is “700 ms”.
• The setting should stay at 700 ms unless pressing [FLASH/CALL WAIT] fails to
pick up the Call Waiting call.
• If PBX functions do not work correctly, consult your PBX supplier for the correct
settings.
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [
d
]
or [
B
], then press the soft key (Select).
3 Scroll to “Set tel line” by pressing [
d
] or
[
B
], then press the soft key (Select).
4 Scroll to “Set flash time” by pressing [
d
]
or [
B
], then press the soft key (Select).
5 Select the desired time by pressing [
d
] or [
B
].
6 Press the soft key (Save), then press [OFF].
Handset
OR
Examp
l
e
9P15556667777
|
Clear Pause
K
L
9P15551234567
|
=Next P
K
fd
L
Phone number
Handset Base Unit
Handset
Initial setting
Back Select
K
d
BL
Set tel line
Back Select
K
d
BL
Set flash time
Back Select
K
d
BL
Set flash time
:700ms
Back Save
K
d
BL
PQQX14302ZB.book 58 ページ ２００４年７月３０日 金曜日 午後４時５２分