Filter
Top Products
Preparation
For assistance, please call: 1-800-211-PANA(7262)
19
Programmable Settings
Base unit ringer tone
(use either the handset or the base unit)
Make sure the base unit is not being used.
Setting the base unit ringer tone by using the
4 Select the desired ringer tone by pressing [
d
]
or [
B
].
• The handset will ring and the ringer tone will
change. If the handset ringer volume has been
turned off, the handset will not ring (p. 17).
• You can also select the ringer tone by pressing [1]
to [7].
5 Press the soft key (Save), then press [OFF].
Press VOLUME [<] or [>], then select the desired ringer tone by pressing
[1] to [7].
[1] to [3] : Bell ringer patterns [4] to [7] : Melody patterns
• After pressing VOLUME [<] or [>], the base unit will ring using the current ringer
tone.
• The base unit will ring and the ringer tone will change.
• To stop ringing, press [STOP].
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [
d
] or [
B
], then press the
soft key (Select).
3 Scroll to “Set base unit” by pressing [
d
] or [
B
], then press the soft
key (Select).
4 Press the soft key (Select) at “Ringer tone”.
5 Select the desired ringer tone by pressing [
d
] or [
B
].
• The base unit will ring and the ringer tone will change. If the base unit ringer
volume has been turned off, the base unit will not ring (p. 18).
• You can also select the ringer tone by pressing [1] to [7].
6 Press the soft key (Save), then press [OFF].
Ringer tone
1:Tone 1
Back Save
K
d
BL
Base Unit
Handset
PQQX14302ZB.book 19 ページ ２００４年７月３０日 金曜日 午後４時５２分