Filter
Top Products
Programmable Settings
20
LCD Contrast
There are 6 levels of LCD contrast. The factory preset is “level 3”.
Talking Keypad
Talking Keypad is a feature that announces phone numbers that you dial, allowing
you to confirm dialed numbers audibly before making calls. You can turn this
feature on or off for the handset and base unit separately. The factory preset is ON.
While handset Talking Keypad is turned on, the handset announces each dialing
button you press when pre-dialing (p. 30).
While base unit Talking Keypad is turned on, the base unit announces each dialing
button you press, and announces “Redial” when [REDIAL] is pressed (p. 32, 33).
If you dial a phone number quickly, the handset and base unit may not
announce the dialed phone number correctly. For best results, dial each digit
one at a time, and wait for the unit to announce each digit before dialing the
next digit.
Handset Talking Keypad feature
1
Press [MENU].
2 Scroll to “Initial setting” by pressing [
d
]
or [
B
], then press the soft key (Select).
3 Scroll to “LCD contrast” by pressing [
d
] or
[
B
], then press the soft key (Select).
4 Select the desired contrast by pressing [
d
] or
[
B
].
• The contrast will change.
5 Press the soft key (Save), then press [OFF].
1 Press [MENU].
2 Scroll to “Accessibility” by pressing [
d
] or
[
B
], then press the soft key (Select).
3 Scroll to “HS Announce” by pressing [
d
] or
[
B
], then press the soft key (Select).
Handset
Initial setting
Back Select
K
d
BL
LCD contrast
Back Select
K
d
BL
LCD contrast
Low High
Back Save
K
d
BL
Ex. Level 3
Handset Base Unit
Handset
Accessibility
Back Select
K
d
BL
HS Announce
Back Select
K
d
BL
PQQX14302ZB.book 20 ページ ２００４年７月３０日 金曜日 午後４時５２分