Filter
Top Products
Preparation
For assistance, please call: 1-800-211-PANA(7262)
15
Programmable Settings
Display Language
You can select either “English” or “Spanish” as the display language. The factory
preset is “English”.
• If you select a language you cannot read, change the display language again
using direct commands (p. 75).
Dialing Mode
If you have touch tone service, set the dialing mode to “Tone”. For rotary or pulse
service, set to “Pulse”. The factory preset is “Tone”.
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [
d
]
or [
B
], then press the soft key (Select).
3 Scroll to “Change language” by pressing [
d
]
or [
B
], then press the soft key (Select).
4 To change from English to Spanish, press the
soft key (Español).
To change from Spanish to English, press the
soft key (English).
• The display changes to the selected language.
• You can also select a language by pressing [
d
] or
[
B
].
5 When Spanish is selected, press the soft key (Salvar), then press
[OFF].
When English is selected, press the soft key (Save), then press [OFF].
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [
d
]
or [
B
], then press the soft key (Select).
3 Scroll to “Set tel line” by pressing [
d
] or
[
B
], then press the soft key (Select).
4 Press the soft key (Select) at “Set dial
mode”.
5 Select “Pulse” or “Tone” by pressing [
d
] or
[
B
].
6 Press the soft key (Save), then press [OFF].
Handset
Initial setting
Back Select
K
d
BL
Change language
Back Select
K
d
BL
Display
:English
Español Save
K
L
Handset
Initial setting
Back Select
K
d
BL
Set tel line
Back Select
K
d
BL
Set dial mode
Back Select
K
d
BL
Set dial mode
:Tone
Back Save
K
d
BL
PQQX14302ZB.book 15 ページ ２００４年７月３０日 金曜日 午後４時５２分