Filter
Top Products
Locator/Intercom
Telephone System
For assistance, please call: 1-800-211-PANA(7262)
53
From
Using this feature, you can also locate a misplaced handset.
Answering Intercom Calls
When a handset is paged, it rings and the Ringer/Message Alert indicator flashes
rapidly.
When the base unit is being paged, it rings.
1 Press [LOCATOR/INTERCOM].
• The SP-PHONE indicator lights.
• The handset will ring for 5 minutes.
• To stop paging, press [SP-PHONE] or [LOCATOR/INTERCOM].
2 When the paged party answers, talk into the MIC.
3 To disconnect the intercom, press [SP-PHONE] or [LOCATOR/
INTERCOM].
• The indicator light goes out.
During an intercom call:
• If you have difficulty hearing while using the handset speakerphone and base
unit speaker, decrease the speaker volume by pressing VOLUME [<] on the
base unit or [
d
] on the handset.
• If an incoming call is being received, you will hear two tones (incoming call
tone, page 59) and “ ” will flash rapidly on the base unit.
To answer the call;
— if using the handset, press [OFF], then [C] or [s].
— if using the base unit, press [SP-PHONE] twice.
1 Press [C], [s] or [HOLD/INTERCOM].
• You can also answer a call by pressing any button
except [
d
], [
B
] or [OFF].
2 To disconnect the intercom, press [OFF].
1 Press [SP-PHONE] or [LOCATOR/INTERCOM].
2 To disconnect the intercom, press [SP-PHONE] or [LOCATOR/
INTERCOM].
• When the ringer volume is turned off (p. 17, 18), the handset and the base unit
will ring at the low level for intercom calls.
• You cannot change the ringer tone for intercom calls.
Base Unit
LINE IN USE
Handset
Call from Base
Base Unit
PQQX14302ZB.book 53 ページ ２００４年７月３０日 金曜日 午後４時５２分