Filter
Top Products
Programmable Settings
16
Line Mode
The line mode is preset to “B” and generally should not be adjusted. If “Line in
use” on the handset and “ ” on the base unit are not displayed properly,
the line mode selection is incorrect. Set line mode to “A”.
Auto Talk
The Auto Talk feature allows you to answer calls by simply lifting the handset off the
base unit. You do not need to press [C] or [s]. The factory preset is OFF.
• In order to view Caller ID information after you lift the handset to answer a call,
leave the Auto Talk feature turned off.
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [
d
]
or [
B
], then press the soft key (Select).
3 Scroll to “Set tel line” by pressing [
d
] or
[
B
], then press the soft key (Select).
4 Scroll to “Set line mode” by pressing [
d
] or
[
B
], then press the soft key (Select).
5 Select “A” or “B” by pressing [
d
] or [
B
].
6 Press the soft key (Save), then press [OFF].
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [
d
]
or [
B
], then press the soft key (Select).
3 Scroll to “Auto talk” by pressing [
d
] or [
B
],
then press the soft key (Select).
4 Select “On” or “Off” by pressing [
d
] or [
B
].
5 Press the soft key (Save), then press [OFF].
Handset
LINE IN USE
Initial setting
Back Select
K
d
BL
Set tel line
Back Select
K
d
BL
Set line mode
Back Select
K
d
BL
Set line mode
:B
Back Save
K
d
BL
Handset
Initial setting
Back Select
K
d
BL
Auto talk
Back Select
K
d
BL
Auto talk
:Off
Back Save
K
d
BL
PQQX14302ZB.book 16 ページ ２００４年７月３０日 金曜日 午後４時５２分