Filter
Top Products
Remote Operation from a Touch Tone Phone
30
Direct Remote Operation
Once you have entered the remote code, you can also control your unit by
direct commands instead of using the voice menu. To end remote
operation, hang up at any time.
Direct commands
To turn on the Answering System
Call your unit and wait for 15 rings.
• The unit will answer and the greeting will be played.
• The Answering System will be turned on. Hang up or enter the remote
code for other options.
• When turning on the Answering System using a rotary or pulse service
telephone, you cannot enter the remote code for other options.
Skipping the greeting
After calling your unit, press [*] during the greeting.
• The unit skips the rest of the greeting and you can start recording your
message after the long beep.
[4] : Plays back new
messages.
[5] : Plays back all
messages.
[1] : Repeats the current
message.
• If pressed within the
first 5 seconds of
playback, the previous
message will be
played.
[2] : Skips the current
message.
[9] : Stops the current
operation.
• To resume, enter a
direct command within
15 seconds, or the
voice menu will start
(p. 29).
[*] [4] : Erases the current
message.
• A short beep will
sound and the next
message will be
played.
[
*] [5] : Erases all messages.
• A long beep will sound
and “No messages” will
be heard.
[0] : Turns off the Answering
System.
• The unit hangs up.
TG2323C.fm Page 30 Friday, February 20, 2004 10:59 AM