Filter
Top Products
Preparing the Answering System
18
Number of Rings
You can select the number of times the unit rings before the Answering
System answers a call, from “2” to “7” or “Toll saver”*. The factory preset is “4”
.
Remote Code
The remote code prevents unauthorized people from accessing your unit
and listening to your messages from any touch tone phone (see “Remote
Operation from a Touch Tone Phone” on page 28).
Choose any 2-digit number (00–99) for your remote code.
The factory preset remote code is “11”. If you do not program your own
remote code, you can use “11”.
To confirm the remote code, repeat steps 1 and 2.
• The remote code is displayed. When finished, press [OFF].
1 Press [VOICE ENHANCER].
• The indicator flashes.
2 Press [2].
• The current setting is displayed on the base unit.
3 Select the number of rings by pressing [0] (Toll saver*), or [2] to [7].
• If [0] (Toll saver) is pressed,
“”
is displayed.
4 Press [VOICE ENHANCER].
• The handset beeps and the indicator light goes out.
*Toll saver
When you call the unit from a remote operation, the number of rings will tell you
if there are any new messages. If the unit answers on the 2nd ring, there is at
least one new message. If the unit answers on the 4th ring, there are no new
messages. To save the toll charges for the call, hang up immediately when you
hear the 3rd ring. The 3rd ring indicates that there are no new messages.
1 Press [VOICE ENHANCER].
• The indicator flashes.
2 Press [1].
• The current remote code is displayed on the base unit.
3 Enter a 2-digit remote code (00–99).
4 Press [VOICE ENHANCER].
• The handset beeps and the indicator light goes out.
Handset
Handset
TG2323C.fm Page 18 Friday, February 20, 2004 10:59 AM