Filter
Top Products
Programmable Settings
14
• When entering the time in step 3, you cannot enter numbers greater than
12. Do not use military time. (To set 13:00 hours, enter “0100”, then
select PM in step 4.)
• When the voice guidance language is set to French, you can use military
time (see page 13 of the French Operating Instructions).
To confirm the time and day, press [VOICE ENHANCER] then [0].
• The current day and time are announced. When finished, press [OFF].
Dialing Mode
If you have touch tone service, set the dialing mode to “Tone”. For rotary or
pulse service, set to “Pulse”. The factory preset is “Tone”.
The time and day may be incorrect after a power failure. When “E”
flashes on the display, set the time and day again.
1 Press [VOICE ENHANCER].
• The indicator flashes.
2 Press [8].
• The current setting is displayed on the base unit.
1: Pulse 2: Tone
3 To select “Pulse”, press [1].
To select “Tone”, press [2].
4 Press [VOICE ENHANCER].
• The handset beeps and the indicator light goes out.
Handset
TG2323C.fm Page 14 Friday, February 20, 2004 10:59 AM