Panasonic kX-TG2323C Answering Machine User Manual


 
Preparation
15
Programmable Settings
Ringer Volume
You can set the handset ringer volume to high, medium, low, or off.
The factory preset is HIGH. If the handset ringer is turned off, the handset
will not ring.
To set the ringer volume to high (preset), medium or low, press [
d
] or [
B
].
• To increase volume, press [
B
]. To decrease volume, press [
d
].
• To stop ringing, press [OFF] or [VOICE ENHANCER].
To turn the ringer off, press and hold [
d
] until 2 beeps sound.
To turn the ringer on, press [
d
] or [
B
].
• The handset will ring at the low level.
• The VOICE ENHANCER indicator flashes while you are adjusting the
ringer volume.
• You can adjust the ringer volume while a call is ringing. Press [
d
] or [
B
]
while the handset is ringing. To turn the ringer off, press and hold [
d
] until
2 beeps sound.
Temporary ringer off
While the handset is ringing for an outside call, you can turn the ringer off
temporarily by pressing [OFF]. The handset will ring again as usual the
next time a call is received.
Ringer Tone
You can select the handset ringer to use one of 7 ringer patterns. There are
3 bell ringer patterns and 4 melody patterns available. The factory preset is
“Bell ringer pattern 1”.
• If you subscribe to a Distinctive Ring Service from your telephone
company with 2 or 3 consecutive rings, select a bell ringer pattern (Tone 1
to 3). If you select a melody pattern, you will not be able to distinguish
lines by their ringers.
• If you select one of the melody ringer patterns, the ringer will continue to
sound for several seconds if:
—the caller hangs up before you answer the call, or
—another person answers the call using another phone connected on the
same line.
Press [
d
] or [
B
], then select the desired tone by pressing [1] to [7].
[1] to [3]: Bell ringer patterns [4] to [7]: Melody patterns
• After pressing
[
d
]
or
[
B
]
, the handset will ring using the current ringer tone.
• The handset will ring and the ringer tone will change.
The VOICE ENHANCER indicator flashes while you are selecting a ringer tone.
• To stop ringing, press [OFF] or [VOICE ENHANCER].
Handset
Handset
TG2323C.fm Page 15 Friday, February 20, 2004 10:59 AM