Filter
Top Products
Useful Information
38
Wall-mounting
Note:
L Be sure to choose a location close enough
to connect the telephone line cord and AC
adaptor securely.
1 Pass the telephone line cord and AC
adaptor cord inside the wall-mounting
adaptor (A). Connect the telephone line
cord (B) and AC adaptor cord to the
base station.
2 Insert the hooks on the wall-mounting
adaptor into the holes (1) and (2) on
the base unit.
3 Adjust the adaptor to hold the base unit,
then push it in the direction of the arrow
until it clicks into place.
4 Drive the screws (not included) into the
wall. Make sure to use the wall-mounting
template for correct positioning.
Mount the unit by inserting the screws
into the round openings on the wall-
mounting adaptor, then sliding the unit
down to secure it. Connect the AC
adaptor to power outlet (page 11) and
the telephone line cord to the telephone
line socket.
To remove the wall-mounting adaptor
While pushing down the release levers (A),
remove the adaptor (B).
Wall Mount Template for base station
B
A
1
2
2
1
Screws
(220–240 V,
50 Hz)
To telephone
network
80 mm
B
A
A
80 mm
TG1861AL(e).book Page 38 Friday, March 31, 2006 3:28 PM