Filter
Top Products
Preparation
13
Screen saver mode
The backlight will turn off completely
after 1 minute of inactivity if the handset is
not on the base unit.
To use the handset when it is in screen
saver mode, first press {ih} to turn the
display on again.
Turning the power on/off
Power on
Press {ih} for about 1 second.
Power off
Press {ih} for about 2 seconds.
Symbols used in these
operating instructions
Display language
1 {ih} i " (middle soft key)
2 Select N by pressing {^}, {V}, {<}, or
{>}. i # (middle soft key)
3 Press {^} or {V} to select “Display
Setup”. i #
4 Press {^} or {V} to select “Select
Language”. i #
5 Press {^} or {V} to select the desired
language.i # i {ih}
Note:
L If you select a language you cannot read,
press {ih}, ", press {V}, press #,
press {V} 2 times, press #, press {V} 3
times, press #, select the desired
language, then press #. Press {ih}.
Date and time
1 " (middle soft key)
2 Select N by pressing {^}, {V}, {<}, or
{>}. i # (middle soft key)
3 Press {^} or {V} to select “Time
Settings”. i #
4 Press {^} or {V} to select “Set Date &
Time”. i #
5 Enter the current day, month, and year.
Example: 17 May, 2006
{1}{7} {0}{5} {0}{6}
6 Enter the current hour and minute.
Example: 3:30 PM
{0}{3} {3}{0} i Press {*} until
“03:30 PM” is displayed.
7 # i {ih}
Note:
L To correct a digit, press {<} or {>} to
move the cursor, then make the
correction.
L The date and time may be incorrect after a
power failure. In this case, set the date
and time again.
Symbol Meaning
" Press " (middle soft key).
i Proceed to the next operation.
# Press # (middle soft key).
j
X
K
N
L
M
Select the mentioned handset
menu icon (page 10).
Example: N (handset setup
menu icon)
Select N by pressing {^}, {V},
{<}, or {>}.
“ ” Select the words in quotations
shown on the display (e.g.,
“Time Settings”) by
pressing {^} or {V}.
TG1861AL(e).book Page 13 Friday, March 31, 2006 3:28 PM