Filter
Top Products
1.4 During a Conversation
User Manual 61
To change to a 5-party conference call during a 3-party conference call with one or 2 outside
parties
To disconnect a 5-party conference call
• Only one 5-party conference call can be in progress at a time.
• You cannot change to a 5-party conference call during a 3-party conference call among 3
extensions.
• If a parked call is not retrieved within 5 minutes while you are trying to establish a
5–party conference call, you will hear a ring tone. If you are having a conversation with
another party at that time, you will hear an alarm tone.
• If you hear a busy tone after dialling the desired phone number or if you dial a wrong
phone number, press the FLASH/RECALL button to retry.
• If you want to talk to the other 2 parties on hold again before the fourth party
answers, first go on-hook, then follow the Call Park Retrieve procedure and press the
CONF button to retrieve each of the held calls.
• 3.1.3 Customising the Buttons
Create or edit a Conference button.
Press CONF.
PT
Talk.
To continue
Dial desired
phone number.
desired
phone no.
Press CONF.
Talk.
A 5-party conference call
is now established.
22
Enter 22 .
C.Tone
(Optional)
For an outside phone number, press the CO
button or seize an outside (CO) line before
dialling the phone number.
The current call is placed
on hold in the parking zone
automatically.
During a 3-party conference call with one or 2 outside parties
Press HOLD.
The current call is placed
on hold in the parking zone
automatically.
PT
On-hook.
At the original extension