Filter
Top Products
4.1 Troubleshooting
146 User Manual
I want to confirm my extension number.
• Confirm your extension number by pressing the
" " key 2 times while on-hook, or through personal
programming.
( Your Extension Number in 1.1.1 Before
Operating a Telephone, 3.1.2 Changing Personal
Settings Using Programming Mode)
The date and/or time are not correct.
• Ask your operator or manager to change the date
or time. ( Date & Time Set in 2.1.7 Changing
System Settings Using Programming Mode)
The display is dim.
• Change the display contrast level.
( 1.1.1 Before Operating a Telephone)
The MESSAGE/Message button light or
Message/Ringer Lamp is lit.
• There are 3 possible reasons:
(1) Someone has left a message waiting indication
for you,
(2) Someone has left a Built-in Voice Message (BV)
for you, or
(3) Someone has left a Voice Mail message for you.
Press the MESSAGE/Message button to call the
party back or receive the message.
"Voice Msg Full" is displayed. • The maximum voice message recording time has
been reached.
Delete voice messages stored in your personal
message area or in the common message area.
It may take about 10 seconds for the display to
return to the idle status display even if the remaining
recording time becomes 5 minutes or more.
( 1.5.5 Using Voice Messaging (Built-in Voice
Message [BV]))
A power failure has occurred. • When a power failure occurs...
All functions of the PBX and Panasonic PTs stop. The
following outside (CO) lines will be connected to the
assigned extensions:
Outside (CO) line 1: extension jack 01
Outside (CO) line 4: extension jack 09
Outside (CO) line 7: extension jack 17
This allows outside (CO) line conversations between
the specified extensions and outside destinations.
• When the power is turned back on...
Your PBX restarts with the stored data automatically.
Memory is protected by a factory-provided lithium
battery. There is no memory loss except for the data
associated with Automatic Callback Busy, Redial, and
Call Park.
Problem Remedy