Filter
Top Products
4.3 Installation of the KX-TDE Maintenance Console
Installation Manual 233
Starting the KX-TDE Maintenance Console and Assigning the Basic
Items (Quick Setup)
When you start the KX-TDE Maintenance Console with the Installer Level Programmer Code and connect
to the PBX for the first time after initialisation (with the factory default setting), Quick Setup will launch
automatically. During Quick Setup, you will set up the basic items. For details about the basic items, refer to
"2.3.4 Quick Setup" in the Feature Guide.
Notice
1. During a long programming session, it is highly recommended that you periodically save the
system data to the SD Memory Card. If the PBX undergoes a sudden power failure or if the system
1. Connect the PC to the PBX with an Ethernet straight cable or RS-232C cross cable.
2. Start the KX-TDE Maintenance Console from the Start menu.
3. "Information before programming" appears.
a. Carefully read this important additional information, which includes updates to this and other
manuals.
b. Click OK to close this window.
4.
a. Enter the Installer Level Programmer Code (default: INSTALLER).
The Programmer Code authorises different programming levels, and the Quick Setup is only
available when you start the KX-TDE Maintenance Console with the Installer Level Programmer
Code.
Note
There are 2 other Programmer Codes with limited authorisation: Administrator Level (default:
ADMIN), and User Level (default: USER).
b. Click OK.
5.
a. Click Connect → LAN or RS-232C from the menu bar, depending on the type of PC connection
with the PBX.
b. The Login screen appears.
6.
a. Enter the system password for installer (default: 1234).
b. Click Setup, then the Setup screen appears.
c. Specify the settings as required.
Note
When connecting to the PBX for the first time selecting LAN, the IP Address and Port Number
must be set to 192.168.0.101 and 35300 respectively.
d. Click OK to return to the Login screen.
e. Click OK.
7. When country/area data do not match:
a. Click OK to replace the country/area data of the PBX. Replacement may take several minutes to
complete.
b. Follow the procedure described in "3.15.1 Starting the PBX" and restart the PBX.
c. Repeat step 5 to reconnect the KX-TDE Maintenance Console to the PBX.
8. Follow the instructions of the Quick Setup wizard and assign the basic items (Quick Setup).
The system menu appears. You may now begin programming the PBX.