Filter
Top Products
3.10 Connection of 2.4 GHz Portable Stations
198 Installation Manual
3.10.6 After Site Survey
After obtaining the proper measurement results, exit Radio Signal Test mode before connecting the CS to
the PBX.
1. Hold down the POWER button on the PS until the PS is turned OFF.
2. Disconnect the CS from the AC adaptor/battery box or the CSIF/DLC/DHLC card to stop supplying
electricity.
3. Switch all DIP switches on the CS from ON to OFF.
KX-TDA0151/KX-TDA0152 KX-TDA0141/KX-TDA0142
KX-TDA0151/KX-TDA0152 KX-TDA0141/KX-TDA0142
12345 6
OFF
ON
1
2
3
4
5
6
OFF ON