Filter
Top Products
3.9 Connection of DECT Portable Stations
Installation Manual 169
3.9.6 After Site Survey
After obtaining the proper measurement results, exit Radio Signal Test mode before connecting the CS to
the PBX.
1. Hold down the POWER button on the PS until the PS is turned OFF.
2. Disconnect the CS from the AC adaptor/battery box or the CSIF/DLC/DHLC card to stop supplying
electricity.
3. Switch all DIP switches on the CS from ON to OFF.
KX-TDA0158CE KX-TDA0141CE/KX-TDA0142CE
KX-TDA0158CE KX-TDA0141CE/KX-TDA0142CE
6
5
4
3
2
1
ON OFF
1
2
3
4
5
6
OFF ON