Filter
Top Products
3.9 Connection of DECT Portable Stations
164 Installation Manual
4. After setting the DIP switches, connect the CS to an AC adaptor/battery box using a power supply
adaptor.
Notes
• The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not
connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it
to become disconnected.
• For users in the United Kingdom:
240 V AC must not be used on a building site. Instead of an AC adaptor, connect a battery box to
the CS.
• If the Power Supply Select switch is set to ON in step 3, connect the CS to an AC adaptor/battery
box. If it is set to OFF, connect the CS to a DLC/DHLC card (KX-TDA0158CE only).
5. Install the CS temporarily for the site survey. Install the CS at least 2 m above the floor, keeping the
antennas in the upright position.
KX-TDA0158CE KX-TDA0141CE/KX-TDA0142CE
Modular
To AC Adaptor (KX-A11/KX-TCA1)/
Battery Box (PSZZTD142CE)
To DLC/DHLC card
Power Supply Adaptor
(PSZZ1TDA0142)
Modular
Telephone Cord
(PSJA1017Z)
To AC Adaptor (KX-A11/KX-TCA1)/
Battery Box (PSZZTD142CE)
Power Supply Adaptor
(PSZZ1TDA0142)
Modular
Telephone Cord