Filter
Top Products
7
Before Operating the PS
Display
When you receive a message while in
standby mode, the PS will alert you by
vibrating or ringing, depending on the
current setting of the Ringer Volume.
When using the navigator key, only the
displayed arrows can be pressed.
<Radio Signal Strength>
<Off-hook Status>
<Off-hook Status for Intercom calls>
<PS Programming Mode>
<Incoming Call Log notification>
<Message Waiting>
<Navigator>
<Battery Strength>
Weak
Out of range
Strong
Full
Low
Needs to be charged
The display depends on the operation. (See
page 11.)
The icons displayed above each soft button
indicate what functions the soft buttons
perform. Functions displayed depend on the
state of use. Press the corresponding soft
button to select a function.
<F-CO Key Display>
<Others>
<Soft Key Display>
:
Used to store a new item in the PS
dialing directory.
:
Displayed when in character
entry mode, shown in table 1 on page
27. Press to switch to mode.
:
Displayed when in character
entry mode, shown in table 2 on page
28. Press to switch to mode.
:
Used to enter an X when storing the
“
TRUNK ACCESS CD
”. (See page
39.)
Meeting mode
Call Forwarding
Do Not Disturb
Ringer ON & Vibration OFF
Ringer ON & Vibration ON
Ringer OFF & Vibration ON
Ringer OFF & Vibration OFF
Auto Answer mode
Key Lock