Filter
Top Products
5
Before Operating the PS
Setting Up
Charging
Wall Mounting
1 Open the battery cover. 2 Install the battery. 3 Close the cover.
1
2
1 Connect the charger to a power outlet
using the AC adaptor.
2 Charge the battery for about 7 hours.
• When the battery has been completely charged, the charge indicator will change
from red to green. Refer to “Battery Information” on page 43.
• It is normal for the PS and charger to get warm while the battery is charging.
1 Connect a AC adaptor to the charger. 2 Drive the included screws into the wall
using the wall template below.
3 Mount the charger securely on the screws.
Charger
AC adaptor
Cord holder
To power outlet
Charger
Charge
indicator
To power
outlet
Charger
AC adaptor
Cord holder
To power outlet
Screws
30 mm
(1.2 inches)
30 mm (1.2 inches)