Panasonic KX-TD612E Telephone User Manual


 
2.2 Making Calls
Operation 53
To call an external party
To start a new conversation
*1: If you dial a wrong DISA user code, dial and try again from this point.
If you enter a wrong DISA user code 3 times, the line will be disconnected automatically.
In case a destination of Intercept Routing is not assigned, the call which was made by DISA
function will be disconnected automatically when it is over a programmed time period.
Digital proprietary telephones or single line telephones enables the DISA Automated
Attendant (AA) feature. Other extensions such as ISDN telephones cannot set this feature.
If Built-in Automated Attendant service is set, you can access the desired extension
simply by pressing 1 digit number (0-9) according to the outgoing message.
In Non Security Mode
Any Outside Telephone
Enter line
access number
(9 or 81-83).
line access
no.
Enter DISA
phone number.
DISA
phone no.
phone no.
Enter phone
number of the
external party.
DISA outgoing
message
D.Tone
Enter line
access
number
(9 or 81-83).
line access
no.
DISA user
code
Enter DISA
phone number.
DISA
phone no.
phone no.
In Trunk Security Mode
Enter phone
number of the
external party.
Enter pre-assigned
DISA user code
(4-10 digits).
DISA outgoing
message
D.Tone
Enter DISA
phone number.
DISA
phone no.
phone no.
In All Security Mode
Enter phone
number of the
external party.
DISA outgoing
message
D.Tone
DISA user
code
Enter pre-assigned
DISA user code
(4-10 digits).
Enter line
access
number
(9 or 81-83).
line access
no.
1
1
D.Tone
D.Tone
Enter desired number.
To dial a different number during a conversation with an outside party or
while hearing the ringback, reorder, or busy tone
Dial .
desired no.
Enter a line access number (9 or 81 to 83)
as the first digit when calling an external party.
D.Tone
Any Outside Telephone