103
Chapter 6Useful Information
Problem
You cannot dial.
You cannot store a phone
number in memory.
While programming, the unit
starts to ring and stops the
program.
(Locator/Intercom) does
not function.
The paged handset does not
answer.
Remedy
• The dialling mode setting is incorrect.
Please check the dialling mode (p. 18).
• The unit is in the call prohibition mode.
To cancel the mode, see page 49.
• The number which you dialled is restricted.
To cancel the number, see page 51.
• Key lock mode is set. To cancel the mode,
see page 39.
• You cannot store a phone number while
the unit is in the talk or intercom mode.
• Do not pause for over 60 seconds while
storing.
• To answer the call, press (Talk) or
(Digital speakerphone)
(KX-TCD970E-B only). Start from the
beginning after hanging up.
• The handset is too far from the base unit.
• The handset is engaged in an outside call.
Wait until the in use indicator ( ) goes
out.
• The paged handset is not in the same
radio area.
• The paged handset is engaged in an
outside call.
• The handset number has been cancelled
or the handset has not been registered.
Register the handset in the base unit
(p. 76, 96).
KX-TCD970E(E)(102~112) 98.10.8 3:27 PM Page 103