Filter
Top Products
26
➡ Paging/Intercom
Transferring a call using the Intercom (continued)
3. (Handset 2) When the unit rings, ZOor N to answer.
4. (Handset 1) Transferring a call ZP
• The transfer is completed.
or
to return to the External Call ZN.
Transferring a Call without the Intercom
This feature enables you to transfer the call to another handset without waiting
for the paged handset to answer.
Eg. Handset 1 is transferring a call to Handset 2.
1. (Handset 1)
During a call, ZN(Intercom icon turns on)
• The call is put on hold.
2. (Handset 1) Z desired handset no. eg. B
• You will hear an internal ring back tone until the other
handset is answered.
3. (Handset 1) ZP
4. (Handset 2) When the unit rings, ZOto answer.
• The transfer is completed.
• If the paged handset is not answered within 30 seconds, a ring tone
sounds at the paging handset. The paging handset can return to the call by
pressing O.
Conference
During a call using the handset, you can make an intercom call to another
handset and then combine the calls together to establish a conference call
between handsets registered to the same base unit.
1. (Handset 1) During a call, ZNthen enter the desired handset
number eg. B.
• The call is put on hold.
• If there is no answer, ZNto return to the call.
2. (Handset 2) When the unit rings, ZOor N to answer.
3. (Handset 1) ZCto establish a conference call.
4. (Handset 1 or 2) ZPto hang up on conference call.
700al australian 2 5 02 2/5/02 3:00 pm Page 26