Filter
Top Products
75
Answering System
Setting the Unit to Call a Pager
1
Press (RECALL/PLAYBACK).
≥The number of new messages is heard on
the handset.
2
Press (3).
≥“ ” is displayed on the base unit.
≥If “ ” is not displayed, the pager
number has not been stored. Store the
number (p. 71), and try again.
3
Press (RECALL/PLAYBACK).
To turn off the pager call mode, repeat
steps 1 through 3.
≥“ ” will disappear.
≥Each time you press (3) in step 2, the mode will
turn on or off.
PAGER
PAGER
PAGER
(RECALL/PLAYBACK)
≥If another message (or Caller ID call) is received before the unit alerts your
pager for a previous message (or Caller ID call), the previous caller information
will not be sent to your pager. Only the last call received will be sent to your
pager.
≥If someone else makes or answers another call with the unit or a parallel
connected phone before the unit alerts your pager for a previous message (or
Caller ID call), the unit will stop alerting your pager for that message (or Caller ID
call).
≥If you receive a telephone number on your pager but cannot recognize the caller,
you may have received a direct inward dial (DID) call, such as from a PBX.
Please call your unit to check the caller’s message.
If you have not subscribed to a Caller ID service, the caller’s
telephone number will not be displayed on your pager.
PQQX12877ZA-5 00.8.23 10:53 AM y[W 75