Filter
Top Products
27
Preparation
“
Selecting the Caller’s Recording Time
You can select “1 minute”, “3 minutes” or “Greeting only” for the caller’s
recording time. Your phone comes from the factory set to “3 minutes”.
1
Press (FUNCTION/EXIT/CH).
2
Press (›) or (‹) repeatedly until the arrow
points to “Program”.
3
Press FWD/EDIT (fl) (Yes key).
4
Press (›) or (‹) repeatedly until the arrow
points to “TAD program”.
5
Press FWD/EDIT (fl) (Yes key).
≥The base unit display shows the answering
system function menu.
6
Press (5).
≥The current setting is displayed on the base
unit.
7
Press (1), (2) or (3) to select the recording time.
1: 1 minute
2: 3 minutes (factory preset)
3: Greeting only
8
Press FWD/EDIT (fl) (Save key).
≥A beep sounds.
≥To return to the standby mode, press (FUNCTION/EXIT/CH).
If you select “Greeting only”, the unit will answer a call with the
greeting message, and then hang up. The unit will not record any
incoming messages.
Ringer volume
1
Program
43
1
=Yes
1
Save DIRECT#
Set recall time
43
1
=Yes
1
TAD program
43
1
=Yes
Answering
system setting.
See base unit.
1
Save directory
Calling pager
43
1
=Yes
Recording time
:3min
Base unit display
PQQX12877ZA-2 00.8.23 10:49 AM y[W 27