Filter
Top Products
25
Preparation
“
Day and Time Adjustment
Voice Day/Time Stamp: During playback, a synthesized voice will
announce the day and time that each message was recorded.
1
Press (FUNCTION/EXIT/CH).
2
Press (›) or (‹) repeatedly until the arrow
points to “Program”.
3
Press FWD/EDIT (fl) (Yes key).
4
Press (›) or (‹) repeatedly until the arrow
points to “TAD program”.
5
Press FWD/EDIT (fl) (Yes key).
≥The base unit display shows the answering
system function menu.
6
Press (0).
≥“Set time” is announced.
If previously adjusted, the day/time will be
heard.
7
Enter the current time (hour and minute) using a 4-digit number.
(Ex. To set 9:30, enter “0930”.)
8
Press ($) to select “AM” or “PM”.
Press (#) repeatedly to set the day.
9
Press FWD/EDIT (fl) (Save key).
≥The unit announces the day/time. The clock starts working.
≥To return to the standby mode, press (FUNCTION/EXIT/CH).
Ringer volume
1
Program
43
1
=Yes
1
Save DIRECT#
Set recall time
43
1
=Yes
1
TAD program
43
1
=Yes
Answering
system setting.
See base unit.
1
Save directory
Calling pager
43
1
=Yes
MON 12:00 AM
¢
=AM/PM #=Day
Base unit display
PQQX12877ZA-2 00.8.23 10:49 AM y[W 25