Filter
Top Products
38
Using the Caller List
With the handset
1
Lift the handset off the base
unit and press (›) or (‹) to
enter the Caller List.
≥The display will show, for
example, the following:
≥You can go to the directory list
by pressing FWD/EDIT (fl)
(p. 54).
2
To search from the most
recent call, press (›).
To search from the oldest
call, press (‹).
≥To scroll between callers,
press (›) or (‹).
3
To exit the list, press
(FUNCTION/EXIT/CH).
≥The handset will return to
the standby mode.
With the base unit
1
Press (CALLER\ID) to enter
the Caller List.
≥The display will show, for
example, the following:
2
To search from the most
recent call, press (SKIP/FF).
To search from the oldest
call, press (REPEAT/REW).
≥To scroll between callers,
press (SKIP/FF) or
(REPEAT/REW).
3
To exit the list, press
(STOP/EXIT).
≥The base unit will return to
the standby mode.
2 new calls
43
1
=Directory
≥Once new calls have been checked, “ˆ” will be added.
≥If “No items stored” is displayed in step 1, the Caller List is empty. After
5 seconds, the unit will return to the standby mode.
≥If more than one call is received from the same caller, the date and time of the
most recent call will be recorded. If the same caller calls again, the call entry
with “ˆ” will be deleted.
Viewing the Caller List
To check who has called, follow the steps below.
Make sure the unit is in the standby mode.
JACK SMITH
0112233445
3:10P JUN.10
2 new calls
<<=Old >>=New
JACK SMITH
0112233445
3:10P JUN.10
*
*
*Caller’s name and phone number are stored in the directory
(—Private name display).
PQQX12877ZA-3 00.8.23 10:50 AM y[W 38