Filter
Top Products
106
Setup (PC)
Connecting to a computer
To run the Multi-Function Center software, you need the following software and hardware.
¡IBM PC 386, or higher, or compatible meeting all AT bus specifications (DX 33Mhz minimum recommended)
¡Microsoft Windows 3.1, 3.11 or Windows 95
¡Hard Disk drive with at least fourteen (14) MB of available storage
¡RS232C Serial Port
Note:
¡The unit cannot print on envelopes.
» If your PC has a 9 pin com port:
9 Pin Female
To COM port
25 Pin Male
KX-FA180 or a RS232C cable
(not included)
9 Pin Female
To COM port
25 Pin Male
KX-FA180 or a RS232C cable
(not included)
25 Pin Adaptor
» If your PC has a 25 pin com port:
*To order a KX-FA180, call toll free 1-800-435-7329.
The RS232C (DB9 Female/DB25 Male) serial cable can also be purchased at a computer supply store.