Panasonic KX-TG2583NZS Telephone User Manual


 
52
Intercom
During an intercom call:
Intercom calls can only be ended with the handset.
If the handset user has difficulty hearing the base unit user, decrease the
base unit speaker volume by pressing (Å) on the base unit.
If an incoming call is received, the intercom call stops and the unit starts to
ring. To answer, press (TALK) or (DIGITAL!SP-PHONE).
Transferring a Call Using the Intercom
The intercom can be used during a call. This feature enables you to
transfer a call between the handset and the base unit.
From the handset to the
base unit
1
Handset:
During a call, press
(INTERCOM/CLEAR). Talk to
the paged party after the
beeps.
The call is put on hold and
Intercom hold is displayed.
If the base unit user does not
answer, press (TALK).
2
Base unit:
When the paging partys
voice is heard, answer using
the MIC.
3
Base unit:
To answer the call, press
(DIGITAL!SP-PHONE).
The transfer is complete.
From the base unit to the
handset
1
Base unit:
During a call, press
(LOCATOR/INTERCOM).
The call is put on hold and
Paging is displayed.
If the handset user does not
answer, press
(DIGITAL!SP-PHONE).
2
Handset:
Press (INTERCOM/CLEAR) to
answer the page.
Intercom hold is displayed.
3
Handset:
To answer the call, press
(TALK).
The transfer is complete.