Panasonic KX-TG2583NZS Telephone User Manual


 
14
Programmable Functions
H
Save DIRECT#
Set recall time
Set line mode
Talk switching
TAD program
You can program the following function items using the handset near
the base unit. The display shows the programming instructions. See the
corresponding pages for function details.
Make sure the unit is in the standby mode initially.
During programming:
*To select a desired function item, press (Å) or (Ä) repeatedly until the
arrow points to the item. Then press FWD/EDIT (É) to go to the next step.
You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.
If the handset has lost communication with the base unit, 3 beeps sound and No
link to base. Place on cradle and try again. is displayed.
Press (FUNCTION/EXIT/CH).
<Function menu>*
To store an item in the directory (p. 42).
To select the ringer volume (p. 16).
Press FWD/EDIT (É).
To store a phone number in the DIRECT button
(p. 40).
To select the recall time (p. 55).
To select the line mode (p. 13).
To set the auto talk feature (p. 15).
To program answering system functions (p. 19).
H
Save directory
Ringer volume
Program
<Function menu>*