Panasonic KX-TG2583NZS Telephone User Manual


 
21
Preparation
9
Press FWD/EDIT (É) (Save key).
The unit announces the day/time. The clock starts working.
If 6 beeps sound, the setting is not correct. Start again from step 5.
To return to the standby mode, press (FUNCTION/EXIT/CH).
In step 7, you cannot enter numbers greater than 12. Do not use 24 hour clock
time. (To set 13:00 hours, enter 0100, and select PM by pressing (*).)
If a power failure occurs, the adjusted day/time will be erased. Readjust
the day/time.
For Caller ID service users (p. 30)
The Caller ID information will re-set the clock after the rst ring if the adjusted
time is incorrect. However, the day will not be re-set. Set the day following the
procedures on pages 20 and 21.
If the time has not previously been set, the Caller ID information will not adjust
the clock.
The Caller ID information will automatically adjust the clock for daylight saving
time.