Filter
Top Products
Chapter 4
41
Multi-Unit User Operations
Transferring a Call from One Handset to Another
The intercom can be used during a call, enablings you to transfer a call between handsets registered
to the same base unit.
Transferring a call using the
intercom
Ex. Handset 1 is transferring a call to
Handset 2.
1 Handset 1:
During a call, press . Then enter
the desired handset number.
•
The call is put on hold.
•
You will hear an internal ring back tone
until the other handset is answered.
•
If there is no answer, press to
return to the call.
2 Handset 2:
When the unit rings, press to
answer.
3 Transferring a call:
Handset 1:
Press .
•
The transfer is completed.
Handset 2 can answer the call.
OR
Ending the intercom:
Handset 1:
Press .
•
Handset 1 returns to the call.
INT
INT
INT
Transferring a call without the
intercom
This feature enables you to transfer the call to
another handset without waiting for the paged
handset to answer.
Ex. Handset 1 is transferring a call to
Handset 2.
1 Handset 1:
During a call, press and enter the
desired handset number. Then press
to transfer the call.
•
The call is put on hold.
2 Handset 2:
When the unit rings, press to
answer the call.
•
The transfer is completed.
•
If the paged handset is not answered within 30
seconds, a ring tone sounds at the paging
handset. The paging handset can return to the
call by pressing .
INT
KX-TCD952EB(040~048) 00.3.30 1:38 PM Page 41