Filter
Top Products
17
Chapter 2
Basic Operations
To turn the handset ringer off
temporarily
When the handset starts ringing, press
G
firmly.
•
“ ” is displayed and the handset
stops ringing.
•
The ringer will turn back on for the next call.
•
This function will not work when the handset is
on the base unit.
To redial the last number dialled
Press
➡
.
•
The last number dialled is automatically
redialled.
RDL
To redial after confirming the
numbers in redial memory
The unit automatically stores the last
10 numbers dialled into redial memory.
1 Press .
•
The last number dialled is displayed.
2 Select the desired number by pressing
.
•
You can also search from the most recent
to oldest number by pressing
G
. To
search from the oldest to most recent
number, press
F
.
•
“
----------
” denotes the end of
redial memory.
•
To exit the list, press firmly.
C
RDL
RDL
3 Press .
•
The number is dialled automatically.
•
If your line has rotary or pulse service, any
access numbers entered after pressing
will not be included when redialling.
To clear all of the numbers in the
redial memory
1 Press .
2 Press
G
or
F
until “ ” is displayed,
then press .
3 Press .
PROG
OK
PROG
Make sure that the power is ON (p. 12), otherwise the handset will not ring.
If the handset is off the base unit, press
.
•
You can also answer a call by pressing any
dialling button to , or
(—Any Key Talk).
Auto talk
If you set the Auto Talk feature to ON (p. 15),
you can answer a call by lifting the handset
off the base unit without pressing
.
9
0
•
The handset and base unit will not ring if both
ringer volumes are set to OFF (p. 14, 15).
Answering Calls
KX-TCD952EB(016~025) 00.3.30 1:41 PM Page 17