Filter
Top Products
Settings
12
- i -
Turning the Power ON
To turn the power OFF, press and hold
until a beep sounds.
•
The display will go blank.
•
The handset will not ring.
•
Depending on the programming mode, you
may not be able to turn the power off. First
make sure the handset is set to the stand-by
mode.
PWR
•
You can choose whether to display the base
unit number, handset number or no display in
the stand-by mode by programming (p. 38).
Press firmly.
•
After all possible configurations briefly appear,
the display will change to the following. Then
the handset is in the stand-by mode.
The current connected base unit number is
displayed.
PWR
Display
Power Button
PWR
KX-TCD952EB(008~015) 00.3.30 1:43 PM Page 12