Panasonic KX-TCD952EB Telephone User Manual


 
15
Chapter 1
Preparation
Ex. MEDIUM is selected.
Selecting the Base Unit Ringer Volume
4 levels (HIGH, MEDIUM, LOW, OFF) are available. The factory preset is MEDIUM. When set to OFF,
the base unit will not ring.
Make sure that the power is ON (p. 12) and the unit is in the stand-by mode.
1 Press then .
2 Press TWICE.
The current volume is displayed.
1: LOW 2: MEDIUM 3: HIGH
0: OFF
2
INT
PROG
3 Press the desired volume level , ,
or .
Each time you press a button, the selected
volume is displayed and rings.
4 Press .
A confirmation tone sounds and the display
will return to the stand-by mode.
PROG
0
3
2
1
22u2
Ex. OFF is selected.
Setting the Auto Talk Feature
The Auto Talk feature allows you to answer a call by lifting the handset off the base unit without
pressing . If you want to use this feature, turn the feature ON. The factory preset is OFF.
In order to view caller’s phone number before answering a call, leave the Auto Talk feature OFF.
Make sure that the power is ON (p. 12) and the unit is in the stand-by mode.
1 Press .
2 Press
G
or
F
until “
F28
is displayed.
3 Press .
The current setting is displayed.
0: OFF (factory preset) 1: ON
OK
PROG
4 Press
G
or
F
to select the desired
setting.
You can press to to select the
setting.
5 Press .
A confirmation tone sounds and the display
will return to the stand-by mode.
PROG
1
0
F28u0
KX-TCD952EB(008~015) 00.3.30 1:43 PM Page 15