Filter
Top Products
36
Selecting the Base Unit Access
Automatic base unit access
The handset automatically selects a registered base unit.
•
When the handset moves to another base unit radio area, it loses contact with the previous base unit
and automatically accesses the new base unit.
•
If the handset is in the overlap area between several base unit radio areas, the handset will access a
base unit in the order of the base unit numbers.
Registration
5 Press .
•
A confirmation tone sounds and the
display will return to the stand-by mode.
PROG
Specified base unit access
You can only select one registered base unit (1 to 4) you want to operate.
•
You can choose the base unit/telephone line where you can make/receive calls.
The factory preset is “Automatic base unit access”. To select the desired base unit, program as follows.
1 Press .
2 Press
G
or
F
until “
F i
” is displayed.
3 Press .
•
The current setting is flashing.
0: Automatic base unit access
1 to 4 (The registered base unit number):
Specified base unit access
4 Press
G
or
F
to select the desired
base unit number (1 to 4).
•
You can press the desired base unit
number to .
•
The selected base unit number flashes.
4
1
OK
PROG
F i000 i234
Ex. Automatic base unit access is selected.
F i000 i234
Ex. Base unit 1 is selected.
KX-TCD952EB(034~039) 00.3.30 1:39 PM Page 36